Nav Menu 3

  Home > RC Airplanes >

Funstar 3D .46 ARF
Funstar 3D .46 ARF

Our Price: $109.98

Quantity in Stock:(Out of Stock)
Availability:: Usually Ships in 24 to 48 Hours
Product Code: PMMA0335

This is the glow powered Fun Star 3D .46 ARF by Phoenix Aircraft Models.    
                   This is a Low Wing Aerobatic Airplane.                    
   Recommended for modelers who have had trainer airplane experience and      
  have also flown/landed low wing trainers. This is a good 3rd or 4th ARF.    
FEATURES: Construction: Balsa and plywood                                      
         Wings: One-piece, pre-covered                                        
         Covering: Heat-shrink Oracover film covering, color scheme is        
           transparent Orange with solid Red cowl and front of fuselage      
         Canopy: Single, clear                                                
         Cowl: Pre-painted fiberglass, must be cut to accomodate engine and  
         Cockpit features: Dark Blue with Red pilot bust                      
         Landing gear: Pre-bent wire 3/16" (4mm) diameter, with 2.4" (61mm)_  
           rubber treaded wheels                                              
           1" (25mm) tailwheel with pre-bent 0.078" (2mm) diameter wire      
         Hardware: Complete package including all fasteners and hinges        
         Motor Mount: Installed, aluminum, non-adjustable                    
INCLUDES: Decals; complete hardware package including wheels, engine mount,    
           landing gear, pushrods, nuts, and bolts; prebuilt wings, fiberglass
           cowl, clear canopy, foam rubber, photo-illustrated instructions,  
           and fuel tank                                                      
REQUIRES: Engine:  .40-.46 cu in (6.5-7.5cc) 2-stroke                          
             OR   .48-.53 cu in (7.8-8.7cc) 4-stroke                          
         Muffler: Stock type supplied with engine                            
         Propeller: 10x6-12x7                                                
         Spinner: 2-1/4" (57mm)                                              
         Radio:   4 channel                                                  
         Servos:  5 standard size and torque                                  
         Y-Harness: One for aileron servos                                    
         Servo Extensions: Two 6" (152mm) for aileron servos, and two 6"      
           (152mm) for rudder and elevator servos                            
SPECS:    Wingspan:     52.7" (1340mm)                                        
         Wing area: 817 sq. in. (approx.)                                    
         Weight:        4.4lbs (2000g) approximately                          
         Length:       51.5" (1310mm)                                        
         Airfoil: Fully-symmetrical low wing                                  
         Center of Gravity: 3.9"-4.7" (100-120mm) Back from the wing's        
           leading edge at the fuselage sides.                                
         Control Throws-                                                      
           Ailerons: Up & Down   0.79" (20mm)                                
           Elevator: Up & Down   0.98" (25mm)                                
           Rudder: Right & Left   2.0" (51mm)                                
           Engine Right Thrust: 2°                                            
            Engine Down Thrust: 2°                                            
COMMENTS: The pictures on the box and in the manual show crossbars in the      
           wing flaps, however the crossbars are NOT included in the actual  
         The pilot shown inside the plane is included.

Share your knowledge of this product. Be the first to write a review »