Nav Menu 3

  Home > RC Airplanes >

ElectriFly F-16 Falcon EDF ARF
ElectriFly F-16 Falcon EDF ARF

Our Price: $219.99

Quantity in Stock:(Out of Stock)
Availability:: Usually Ships in 24 to 48 Hours
Product Code: GPMA1801

This is the brushless electric powered, radio controlled, almost ready to fly  
                         ElectriFly F-16 Falcon EDF.                          
 For advanced RC pilots, not suitable for beginning or intermediate pilots.  
         This ducted fan jet reaches speeds over 90 mph (145 km/h),          
          and should only be flown at an approved AMA flying site.            
    Because it can quickly disappear from sight, the pilot should remain      
                   focused on the plane at all times.                        
FEATURES: Construction: Fiberglass fuselage with balsa and ply wing and tail  
         Wing: Balsa and ply, covered in Top Flite MonoKote                  
         Ducted Fan Unit: Hyperflow 56mm fan                                  
         Aileron Control: Dual servo                                          
         Motor: ElectriFly Ammo 24-45-3790kV brushless inrunner              
         Canopy: Clear with lightweight profile pilot, attaches with magnets  
         Launching System: Bungee type for easy unassisted launches          
         Stand: Plywood                                                      
INCLUDES: ARF ElectriFly F-16 Falcon EDF Airplane with Motor, Ducted Fan,      
           Display/Assembly Stand, Launching System, Instruction Manual      
REQUIRES: Radio: Four channel                                                  
         Servos: Four micro (2-aileron, 1-rudder, 1-elevator)                
         6" (152mm) Extensions: Two for aileron servos                        
         Dual Servo Extension: Required if aileron servos will not be mixed  
         ESC: 35A, brushless compatible                                      
         Battery: 14.8V LiPo                                                  
         Charger: LiPo compatible                                            
         Building and field equipment                                        
SPECS:    Wingspan: 22.5" (570mm)                                              
         Length: 34.5" (875mm)                                                
         Wing Area: 166 sq in (10.7sq dm)                                    
         Weight: 32 - 34oz (910 - 960g)                                      
         Wing Loading: 27.8 - 29.5oz/sq ft (85 - 90g/sq dm)                  
         Center of Gravity (CG): 3-1/4" (83mm) back from the leading edge of  
           the wing where it meets the fuselage                              
         Control Throws:          Low Rate           High Rate                
           Elevator           3/16" (9mm) 9°      5/16"  (8mm) 14°            
           Rudder             1/4"  (6mm) 14°     11/32" (9mm) 20°            
           Ailerons           1/8"  (3mm) 7°      3/16"  (5mm) 10°            
COMMENTS: Following are the Top Flite MonoKote colors used to cover the wings  
           and horizontal stabilizer and order numbers for 6' rolls;          
             White, TOPQ0204            True Red, TOPQ0227

Share your knowledge of this product. Be the first to write a review »