Store

Nav Menu 3






  Home > Accessories >

Power 60 Brushless Outrunner Motor, 400Kv
eflite


 
List Price: $109.99
Our Price: $109.99

Quantity in Stock:(Out of Stock)
Availability:: Usually Ships in 24 to 72 Hours
Product Code: EFLM4060A
Qty:

Description
 
Features


   Equivalent to a 60-size glow engine for 6 to 10 lb (2.7 to 4.5 kg) airplanes
   Ideal for 46-size 3D airplanes up to 7 lb (3.2 kg)
   Ideal for models requiring up to 1700 watts of power
   High-torque, direct-drive alternative to inrunner brushless motors
   Includes mount, prop adapters and mounting hardware
   External rotor design—6mm shaft can easily be reversed for alternative motor installations
   Slotted 14-pole outrunner design
   High-quality construction with ball bearings and hardened steel shaft
   Quiet, lightweight operation


Overview


The Power 60 is designed to deliver clean and quiet power for 60-size sport and scale airplanes weighing 6 to 10 pounds (2.7–4.5 kg), 46-size 3D airplanes up to 7 pounds (3.2 kg), or models requiring up to 1700 watts of power. It’s an especially good match for Hangar 9 .60-size warbirds like the Corsair 60 (HAN2575), P-47D Thunderbolt 60 (HAN2975), P-40 Warhawk 60 (HAN2850), P-51 Mustang 60 (HAN2375), P-51 Miss America 60 (HAN2775) and .46-size 3D planes such as the Hangar 9 Funtana 40 (HAN1975) or Seagull Harrier 46 (SEA3025).


Hardware is included with the purchase of this motor.
Examples of Airplane Setups:

NOTE: All data measured at full throttle. Actual performance may vary depending on battery and flight conditions.

Hangar 9 P-51 Miss America (HAN2775)

Motor: Power 60
ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)
APC 15x10E
Battery: Thunder Power PRO LITE 6000mAh 6S3P (THP60003S3PPL x2 in series)
Flying Weight w/Battery: 8.8 lb

Amps Volts Watts Input Watts/Pound RPM
56.0 21.3 1195 136 7375

Expect very strong performance with a great balance of thrust and top speed. Average duration is approximately 8 to 15 minutes depending on throttle management.


Seagull Harrier 3D 46 (SEA3025)

Motor: Power 60
ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)
Prop: APC 16x8E
Battery: Thunder Power PRO LITE 4200mAh 6S2P (THP42003S2PPL x2 in series)
Flying Weight w/Battery: 6.4 lb

Amps Volts Watts Input Watts/Pound RPM
50.5 21.0 1060 165 6975

Expect very strong performance with unlimited vertical and plentiful power for hovering and 3D aerobatics. Average duration is approximately 8 to 15 minutes depending on throttle management.

Tech Notes


Maximum operating temperature: 220 degrees Fahrenheit.

Adequate cooling is required for all motor operation at maximum current levels.

Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.


You will need...

60A brushless ESC
5S–7S Li-Po or 16- to 24-cell Ni-MH/Ni-Cd
14x8 to 16x10 prop



Specifications

Type: Brushless outrunner
Size: Replacement for 60-size glow engines
Bearings or Bushings: One 6 x 15 x 5mm Bearing, and Two 6 x 12 x 4mm Bearing
Wire Gauge: 14
Recommended Prop Range: 14x8 to 16x10
Voltage: 18.5 to 28.8
RPM/Volt (Kv): 400
Resistance (Ri): .06 ohms
Idle Current (Io): 2.70A @ 10V
Shaft Diameter: 6mm (.24 in)
Overall Length: 62mm (2.40 in)
Weight: 380 g (13.0 oz)
Overall Diameter: 50mm (2.00 in)
Diameter: 50mm (2 in)
Length: 62mm (2.4 in)
Continuous Current: 55A
Maximum Burst Current: 65A (15 sec)
Cells: 16–24 Ni-MH/Ni-Cd or 5–7S Li-Po
Speed Control: 60A brushless

Share your knowledge of this product. Be the first to write a review »