Nav Menu 3

  Home > Accessories >

Park 180 Brushless Outrunner Motor, 2200Kv

List Price: $29.99
Our Price: $29.99

Quantity in Stock:(Out of Stock)
Availability:: Usually Ships in 24 to 72 Hours
Product Code: EFLM1120


   Ideal for 3D models weighing 2–3 oz (55–85 g) and sport and scale models weighing 3–6 oz (85–170 g)
   Ideal for indoor and outdoor small aerobatic park flyers
   Extremely quiet and lightweight—just .3 oz (8.5 g)
   High-torque, direct-drive alternative to inrunner brushless motors
   Designed for firewall mount or carbon tube mount
   4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
   Up to 30 watts
   Includes prop adapter
   Includes mount, mounting hardware and 2mm gold BL connectors
   Upgraded performance for indoor motors
   High-quality construction with ball bearings and hardened steel shaft


Ideal for 3D models 2–3 oz (55–85 g) and sport and scale models 3–6 oz (85–170 g), or models requiring up to 30 watts of power.

Tech Notes

Maximum operating temperature: 220 degrees Fahrenheit

Adequate cooling is required for all motor operation at maximum current levels.

Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.

You will need...
4-6A Brushless ESC

2-3S Li-Po or 4-8 cell Ni-Cd/Ni-MH

3x3 Direct Drive Prop


Type: Brushless outrunner
Size: 180
Bearings or Bushings: Two 1.5 x 4 x 2mm Bearings
Recommended Prop Range: 3x3 to 6x3 ‘Direct Drive’ for 2S or 4x4 or 4.5x3 for 3S
Voltage: 4.8–11.4V
RPM/Volt (Kv): 2200
Resistance (Ri): .91 ohms
Idle Current (Io): .30A @ 8V
Continuous Current: 2.6A
Maximum Burst Current: 3.2A (15 sec)
Cells: 2–3S Li-Po or 4–8 Ni-Cd/Ni-MH
Speed Control: 4–6A brushless
Weight: 8.5 g (.30 oz)
Overall Diameter: 16mm (.63 in)
Shaft Diameter: 1.5mm
Overall Length: 20mm (.80 in)

Share your knowledge of this product. Be the first to write a review »