Nav Menu 3

  Home > Accessories >

30-Amp Pro Switch-Mode BEC Brushless ESC (V2)

List Price: $44.99
Our Price: $44.99

Quantity in Stock:(Out of Stock)
Availability:: Usually Ships in 24 to 72 Hours
Product Code: EFLA1030B


   Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
   3.5A continuous current, 5V Switch-Mode BEC Circuit
   Stronger BEC for support of most 3-axis stabilization systems
   Drive up to 7 analog or 6 digital standard-size servos with the BEC
   3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
   Programmable motor braking
   Safe power-arm mode prevents accidental starts
   Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
   Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
   Programmable soft start for helis and airplanes
   Auto motor shut down if signal is lost or there is interference
   Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
   Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads


The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.


Continuous Maximum Current: 30A (proper cooling required)
Input Voltage: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
Input Connector Types: 16 AWG leads with E-flite EC3 Connector
Output Connector Types: 16 AWG leads with 3.5mm Gold Bullet Connectors
Momentary Peak Current: 35A (15 sec)
Length: 51.0mm (2.00 in)
Width: 28.0mm (1.10 in)
Height: 8.70mm (0.35 in)
Weight: 31.0 g (1.10 oz)
Wire Gauge: 16 AWG

Share your knowledge of this product. Be the first to write a review »